Karen Shutt (216.108.203.20) -

I have an old lateral file cabinet that doesn't have the long rails. The cabinet is a five drawer, 36" wide unit. The bars that I need for it would be approx. 34 1/8" long with a hook on each end. The opening that these rails (bars) need to go through is 3/4" high and 1/8" wide. Do you have any thing that will work? I need ten of them. Please respond.

Comment #1 Jean Creede (65.190.154.222) -

I have almost one hundred lateral file cabinets in my used office furniture store. If you could tell me the manufacturer of your file cabinet, I might be able to find one that would match yours. I hope I can help!

Comment #2 Jose (75.22.53.34) -

i have this w.h. harper co. devon four drawer verical cabinet that i need rails for. i have been wanting to organize my art nots and scrap material but just realized i have no rails can any one help?

Jose

Comment #3 Jenny Hannant (70.182.25.204) -

I have a 2 drawer lateral filing cabinet that don't have a brand anywhere on it, it is completely blank. The rails are missing/broken. The matching filing cabinet has rails, and they are 33 1/4 inches long and 2 hooks at end approximately an inch apart. Does anyone know where I can find 4 rails?

Comment #4 George from Dead Like Me (Contact Member) -

Wouldn't a regular lateral steel frame work? I know if would be preferable to have the exact thing that fits the grooves in the drawer, but you can buy a frame cheaply at Office Depot.

Comment #5 Roger Everhart (68.91.26.94) -

I have a lateral file cabinet with no brand name on it. It is a two drawer. 42" long by 18" deep. Can I get rails for this filing cabinet that allows me to hang my files front to back? Or can I only hang them left to right?

Comment #6 Sharon (68.193.202.132) -

I have two Corry-Jamestown file cabinets #101-5 in need of rails. I could use at least two, six total if possible. Please respond if you have these parts. Thanks!

Comment #7 Lynne Owens (64.241.230.3) -

I have a 3-drawer lateral cabinet, 36" wide. The rails needed for it would be approx. 34 1/8" long with a hook on each end. The opening that these rails (bars) need to go through is 3/4" high and 1/8" wide. Are these available and what is the cost for three?

Comment #8 Martha M. (69.104.215.235) -

I have a HON lateral file cabinet and I'm missing about four 40" Rails. If there is anyone that can help me find some or if you are willing to sell please contact me A.S.A.P

Thank you so much!!

Comment #9 laurie (75.57.157.231) -

I'm looking for rails for a hon file cabinet. I need approx 10 36" rails if anyone has any for sale let me know. Used is fine.

Comment #10 Libby Starr from Boston (Contact Member) -

Hi - I am looking for (10) meridian file cabinet rails -

must be 30"W for side-to-side fiing.

Comment #11 Kimberly H (208.30.130.51) -

We need one hanging folder frame for our lateral Meridian steel filing cabinet. It is 36" wide.

If there is anything else you need to know, please let me know.

Thank you!

Comment #12 Dave Whitman from Akron Ohio (Contact Member) -

Jean, Hi I have a Corry Hiebert that I need 33 1/2" long rails for I could use 6 sets if you have something that would work.

Thanks,

Dave

Comment #13 mike (71.52.108.151) -

looking for (6)

42 inch hang rails for a HON lateral file cabinet

Comment #14 Judy Tiger (71.252.120.37) -

I need two metal rails for a Corey Jamestown lateral filing cabinet in Washington DC. the rails are 33+3/4" long at the top of the rail and 32+5/8" and the bottom of the rail. Can someone help me locate these? thanks!

Comment #15 Scarlett (98.203.24.100) -

I have an All-Steel lateral file cabinet and need rails for it. Is there any place to get them.

Comment #16 gift man from wilminton (Contact Member) -

I have a 36" Cole 3- drawer lateral file cabinet with a broken front drawer cover attachment. The piece I need attaches to the scissor slide for the face plate that retracts into the cabinet allowing you to open the file drawer. This is the pivot hinge that attaches to the back of the face plate and is about 6 5/8" long. If anyone has one please contact me. This particular drawer does not operate because the faceplate is not secured to the scissor hinge.

I have no clue what to call these parts and I apologize if this is not clear enough. Please ask questions.

Comment #17 SCM from Campbell, California (Contact Member) -

I have a Harpers 4 drawer Lateral file cabinet (~42" wide) and I need rails for it. Does anyone have any I can buy???

Many thanks,

SCM

Comment #18 Marian from Arkansas (Contact Member) -

I am trying to locate a locking mechanism for a tall, double locker-style All-Steel storage cabinet and shelf brackets for two 36W x 14D x 52H storage cabinets. There is only one reference number on the smaller cabinet, 115-642, located inside top right. I don't know to what that refers. The larger cabinet may have some identifying numbers, but I will provide those if possible when needed.

Marian

Comment #19 Tim Dowty (68.228.43.239) -

I also have a W.H. Harper Devon 4 drawer filing

cabinet and need the rails for two of the drawers.

If anyone knows where to get them, I'd greatly

appreciate it.

thanks

tim

Comment #20 Maark Roberts from DC (Contact Member) -

I need 38 rails for Artoplex lateral file Cabinet.

Comment #21 Sandy (71.43.27.42) -

I am needing 10 side rails for a Hon 585L cabinet and also 8 rails for a Cole Lateral. Please contact me at 813-425-4492 if you know where I can get these.

Thanks!

Sandy

Comment #22 Sheila D. Cumming, Georgia (74.166.126.10) -

I have Haskell Filing Cabinets- 36 inch Drawers- I need 16 Rails.... Does anyone have rails for this Brand or know what rails would fit the 36' Wide Haskell File Cabinets?

Thanks!

Sheila

Comment #23 Sharris from Denver (Contact Member) -

I have a 5 drawer, 36" wide InterRoyal filing cabinet that is missing 3 rails. Any help is appreciated. Thanks.

E-Mail:         

Name:            (required)

Title:           (required)

Message (do not enter emails or links or urls in the message!):